Click Event Name for more details

  • Teach-In Seminar: The application of forging technology in high performance motorsport - 11 March 2010
    As engineers seek to optimise the performance of cars in high end racing series such as F1, NASCAR, GP1, they are turning more and more to the benefits offered though the utilisation of advanced precision forging techniques and improved material characteristics due to hot-working. This presentation will give an overview of the demanding environment in which forged components are out-performing other manufacturing techniques and highlight the development of forging techniques specifically tailored to the motorsport industry.
  • FREE HSE Revitalising Network Workshop: Leadership - 16 March 2010
    Leadership in health & safety and one company's journey: JCB Ltd
  • BSSA Workshops: An Introduction to Stainless Steel - Sheffield - 18 March 2010
    These half-day Starter Workshops will give you a comprehensive introduction to stainless steel, whether you’re new to the industry or just looking for a refresher on the basics. Topics include grades, finishes, corrosion, mechanical properties and applications of stainless steel. The workshop will also provide an introduction to the Stainless Steel Specialist Course, suitable for those looking to develop their knowledge further.
  • CBM Executive Board Meeting - 23 March 2010
    The CBM Executive Board meets quarterly to review CBM's affairs.
  • Industrial visit to Independent Forgings & Alloys - 24 March 2010
    Independent Forgings & Alloys have invested heavily in forge and ring rolling plant over the last 5 years, and have recently won the “Queens Award for Enterprise” in the International Trade category. See www.forgedinsheffield.com
  • CBM Carbon Reduction Commitment Seminar - 30 March 2010
    As promised, the Environment Agency has published further guidance concerning the Carbon Reduction Commitment (CRC) Energy Efficiency Scheme, with more to come. Even so, many companies are still confused and have not yet recognised the significance of the legislation and how it might affect them. It is very probable that you will have to take some action. This is a mandatory scheme and the penalties for failure to register by 30 September 2010 are a £5,000 fine and £500 per day until complete. Therefore, if you are in any doubt as to what you need to do, then please come along to this seminar to gain information on what you need to do to comply.
  • CBM event: Making your business fly - 31 March 2010
    The whole ethos of this ‘Making Your Business Really Fly’ workshop is to really allow you to take a bird’s eye look at your business. To allow you to take that step back and focus on what you want, how you’re going to get there – and how to stay there.
  • WIRE 2010 Dusseldorf, Germany - 12 April 2010
    12-16 April 2010 For further information please visit www.wire.de.
  • CBM Cold Rolled Sector Event - 22 April 2010
    CBM is holding a FREE Cold Rolled Sector event
  • CBM H, S, & E Group Meeting - 27 April 2010
    The CBM H,S,&E Group meet quarterly to discuss relevant H&S issues. The recent Accident Reduction in Metalforming Sector (ARMS) initiative has embarked on a strategy to reduce the accidents in the sector and subsequently reduce insurance premia.
  • CBM Annual General Meeting - 29 April 2010
    The CBM Annual General Meeting 2010 which will take place at the Confederation headquarters on: Thursday 29th April. Please note that the AGM will begin at 4.00pm.
  • International Conferences: 'New Developments in Sheet Metal Forming' and 'Hydroforming of Sheets, Tubes and Profiles' - 04 May 2010
    - 'New Developments in Sheet Metal Forming' 4-5 May 2010. - 'Hydroforming of Sheets, Tubes and Profiles' 6 May 2010.
  • Half day workshop: Metalforming software tools - 06 May 2010
    The purpose of this event is to increase awareness of available software for use in metal-forming processes. The programme will take the form of an interactive “hands-on” case study, indicating how software tools are used for production and development purposes.
  • Metalform Mexico - 11 May 2010
    METALFORM Mexico (11-13 May) successfully organized and launched its co-location with the AWS Weldmex, Fabtech Mexico and COATech tradeshows, creating what is quickly being nicknamed Mexico’s “Mega Event” for tool and die, forming, fabricating, tube and pipe, welding, assembly and finishing of sheet metal component parts and assemblies.
  • BSSA Workshops: An Introduction to Stainless Steel - National Metalforming Centre, West Bromwich - 13 May 2010
    These half-day Starter Workshops will give you a comprehensive introduction to stainless steel, whether you’re new to the industry or just looking for a refresher on the basics. Topics include grades, finishes, corrosion, mechanical properties and applications of stainless steel. The workshop will also provide an introduction to the Stainless Steel Specialist Course, suitable for those looking to develop their knowledge further.
  • China International Forgemasters Meeting 2010 - 24 May 2010
    Confederation of Chinese Metalforming Industry (CCMI) will hold an international forgemasters meeting in Chengdu, the capital city of Sichuan Province, China from 24th to 27th May 2010. Participants will enjoy information exchange of not only profession but also China’s history, as well plant tour to China National Erzhong Group Co.
  • MACH Exhibition 2010 (7-11 June) - 07 June 2010
    MACH 2010 is the place to be if you want to see the latest in manufacturing technologies. Be it metalcutting, metal forming or associated technologies, services and equipment - MACH 2010 has it all.
  • CBM Executive Board Meeting - 24 June 2010
    The CBM Executive Board meets quarterly to review CBM's affairs.
  • CBM Executive Board Meeting - 05 October 2010
    The CBM Executive Board meets quarterly to review CBM's affairs.
  • Teach-In Seminar: AGM & Medal Awards - Metalforming - 20 October 2010
    Following submissions for the Medal Award, entrants will be invited to make a presentation about their entry. The medal will also be awarded at this session.
  • EuroBLECH 2010 - 26 October 2010
    The 21st International Technology Exhibition for Sheet Metal Working: 26-30 October, Hanover, Germany